What is a transceiver in computers?
Short for transmitter-receiver, a device that both transmits and receives analog or digital signals. The term is used most frequently to describe the component in local-area networks (LANs) that actually applies signals onto the network wire and detects signals passing through the wire.
What is the transceiver used for?
The transceiver is an important part of a fiber optics network and is used to convert electrical signals to optical (light) signals and optical signals to electrical signals. It can be plugged into or embedded into another device within a data network that can send and receive a signal.
What is the function of a transceiver in networking?
Network transceivers connect network nodes and send and receive analog or digital signals. In Ethernet networks, they are called medium access units (MAU). Network transceivers apply signals onto a network wire and detect signals passing through the same wire.
What is transceiver example?
Examples are cell phones, which transmit and receive the two sides of a phone conversation using radio waves to a cell tower, cordless phones in which both the phone handset and the base station have transceivers to communicate both sides of the conversation, and land mobile radio systems like walkie-talkies and CB …
What are GREY optics?
Grey (standard) A standard transceiver, otherwise known as a grey transceiver, is a single channel device. It is known as grey because xWDM signals are coloured wavelength channels, and any signal that is not xWDM is uncoloured or ‘grey’.
What does all mode transceiver mean?
All-mode: radio that can operate on AM, SSB, CW, digital modes and FM.
Is a router a transceiver?
When a device has both a transmitter and a receiver, it is sometimes called a transceiver. Devices such as routers can both transmit and receive, which is what makes them useful for building networks–you probably want to be able to send messages to your neighbors and out to the world, as well as receive messages!
What is a transceiver on a Cisco switch?
Briefly, a transceiver can be defined as a device that comprises of both a transmitter and a receiver of analog or digital signals. Network transceivers are used in specific networks like LAN to transmit signals.
What are the transceiver design considerations?
The transceiver duplexer has to provide the following electrical performance: low transmission loss to maximize the radiated power. minimum receive loss for low receiver noise figure and maximum receiver sensitivity. proper impedance match between transmitter, antenna and receiver.
What is a transceiver (TRX)?
What Does Transceiver (TRX) Mean? A transceiver (TRX) is a device which can transmit and receive signals. Usually, a transceiver contains both a transmitter and a receiver, both of which share common circuitry. However, if the transmitter and receiver only share a common housing and nothing else, the device is called a transmitter-receiver.
What is a transceiver in networking?
Transceivers. Technically, on a LAN the transceiver is responsible to place signals onto the network media and also detecting incoming signals traveling through the same cable. Given the description of the function of a transceiver, it makes sense that that technology would be found with network cards.
What is transceiver module?
While the transceiver module is a common piece of electronic equipment used on a regular basis by people around the world, most are not aware they are using it, let alone what it is. The device contains a receiver and transmitter that allow for sending and receiving information.
What is a transceiver circuit?
A transceiver circuit is electrical circuitry with the ability to both transmit and receive signals.