How do you reset a combination lock if you forgot the code?

How do you reset a combination lock if you forgot the code?

Set the first number of the combination as your starting point. It may be helpful to spin the dial a few times before doing this to reset the lock. Turn the dial counterclockwise to find the second number. Maintaining gentle pressure on the shackle, turn the dial slowly.

How do I reset my dial lock?

Dial the first number of your combination by turning the dial to the left, going counter-clockwise. Rotate the dial to the right going clockwise, being sure to pass the first number just once. On the second rotation, stop turning when the second number of the combination reaches the “change” position.

How do you reset a 4 digit combination lock if you forgot the code?

Take these steps to reset your lock:

1. Pull up the shackle to open the lock.
2. Rotate the shackle 90° counterclockwise and press all the way down.
3. Hold down the shackle and set your own combination by turning dials.
4. Turn the shackle back as normal. The setting is now complete.

How do you figure out the combination to a 4 digit lock?

How to Open a Four Number Combination Lock

1. Find your combination.
2. Go to the first number.
3. Set the second dial on the lock to the second number in the combination.
4. Use the third wheel to find the third number in the combination.
5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

How do you open a lock box without the code?

How can I open a lockbox without the code?

1. Bend two safety pins to try picking the lock yourself.
2. Open up the second paper clip into an L shape.
3. Insert the second, L-shaped paper clip into the bottom of the keyhole and push it in.
4. Pull the straight paper clip out, raking it upward against the pins.

How do you reset a lock to a new combination?

This tool is used to manually turn the wheels in the lock to a new combination. Insert the reset tool into the hole on the side of the lock. Push the reset tool in and turn 90 degrees in either direction. Arrange wheels to the combination of your choice. Turn and remove reset tool from lock. The new code should be set.

What do I do if my padlock is locked?

If it’s locked, you will have to use bolt cutters to open the lock or call a locksmith. Most manufacturers include a reset tool packaged with their resettable locks. This tool is used to manually turn the wheels in the lock to a new combination. Insert the reset tool into the hole on the side of the lock.

How do you reset the lock on a car?

Push the reset tool in and turn 90 degrees in either direction. Arrange wheels to the combination of your choice. Turn and remove reset tool from lock. The new code should be set. Write down your new combination and store it in a secure place. These instructions might vary slightly, depending on the manufacturer.

How can I recover a lost combo lock?

If the combo lock has a serial number on it, then it’s likely that you can recover the combination from the manufacturer. Check with them through their website to begin the process, which usually requires that you send a notarized lost combination form to the company. They will retrieve the correct code and send it to you.