How many square feet are in a 16 inch tile?
MSIMontecito 16 in. x 16 in. Matte Ceramic Floor and Wall Tile (1.78 sq. ft.)
How many 18×18 tiles do I need for 300 square feet?
For example, if you wanted to use 18 X 18 inch tile pieces, which equals 2.25 ft, and the total square footage of your room is 300sq ft, then you would divide 300 by 2.25, which would equal 133.3 pieces.
How many SF is a 12×12 tile?
Add up the square footage of all the areas to be tiled. Since a 12 by 12 ceramic tile is one square foot, the number of square feet equals the number of tiles you need to cover the floor space. However, you should allow for cutting tiles to fit or breakage, so add 20 percent to your measurement.
How many tiles do I need for shower?
Measure the Shower Area Start on one shower wall and use a measuring tape to measure the length as well as the width of the wall needing tile. Multiply the length and width together and divide by 144 to determine the square footage of that wall. Repeat for all other walls in the shower area.
How to calculate how many square feet of ceramic tile?
Convert from square inches to square feet. 103 sq. in. / 144 = 0.72 square feet. Divide the area of the room by the area of the tile: 168 square feet / 0.72 = 234 (rounded up). Add 10% for waste, or up to 30% for larger sizes or intricate designs: 234 x 1.10 = 257.4.
How much extra tile should I buy for my home?
How much extra tile should you buy? You should purchase between 10% and 20% more tile than you’ll need. For multiple size designs, mosaics and large tiles, you might even need up to 30% more. This accounts for breakage and waste.
How big of a border do you need for 6 foot tiles?
For 6”x12” tiles with a border of 30 feet = 30 tiles. Countertops and backsplashes require a wide variety of trim pieces. Have a professional designer or contractor pick these out or seek help at your local home improvement store. Get designs from the same batch.
How big of an area do you need for a tile floor?
Usual values range from 1/16 to 1/2 an inch (2mm to 13mm) and the size varies depending on materials used and the intended design. For example, uniformly cut granite tiles allow for much smaller spacing between tiles, increasing the number of tiles needed. Finally, you need to enter your expected percentage of wasted tiles.